All work was focused on around D9015. This saw Pete V making a start on No2 Ends ETH Box. All tested and should be good!
The Lifting Brackets were fitted onto the loco, this is for when the accommodation bogies get fitted underneath the loco.
Bill and Alex made a start with the repaint of one of the locos bogies, most of the bogie was completed however may need a second coat of paint.
Steve continued with the Generator repaint on PU417.
Pete and Mick fitted the last few Air Control Gauges and Train brake controls, whilst Nigel went around testing the air pipes on the loco.
Photo Credits - Alex Stojanovic